E-SOLDER 3022 IN 2 OZ KIT ( 60 ML )

E-Solder 3022 is an epoxy silver paste recommended for applications requiring low electrical resistance and good adhesive properties.

E-Solder 3022 requires the addition of Hardener No. 18 to harden and cure.

E-Solder 3022 may be cured at room temperature; however the application of heat will accelerate and shorten the cure time.

- Based : Epoxy

- Color : Silver

- Viscosity : Paste

- Mix Ratio : 100:8

- Operating température : +150 °C

- Volume Resistivity ( Ohm x cm ) : 0,019

- Cure Schedule : 

25°C / 24 hours

65°C / 3 hours

Typical applications of E-Solder 3022 are lead terminations, printed circuits and shielding on bases which will not withstand the elevated temperatures required for fired-on coatings or solders.