SIKAFAST 5211NT GREY
Sikafast 5211 NT is a fast curing, flexible 2-component adhesive system.
Characteristics
- Strength development within minutes after application
- Adhesion to a wide range of metals and plastics with no or limited substrate preparation
- High strength
- Gap filling, allowing for manufacturing tolerances (up to 3 mm)
- Flexible
- Vibration damping
- Solvent and acid free
- Easy mixing
- Low odour
- Approved Wheelmark and NSF R2 (incidental food contact
Application
- New generation of fast curing, flexible adhesives designed to substitute welding, riveting, clinching and other mechanical fastening techniques
- Suitable for high strength fastening of concealed joints on different types of substrates including top coats, plastics, glass etc.
Technical characteristics
Component A SikaFast-5211 NT
- Colour : white
- Density (CQP 006-4) : 1,15 kg/l approx.
Component B SikaFast-5200
- Colour : black
- Density (CQP 006-4) : 1,5 kg/l approx.
Mixture (A+B)
- Chemical base : Acrylic
- Colour : grey
- Curing mechanism : Polymerisation
- Density mixed (calculated) : 1,19 kg/l approx.
- Mixing ratio
by volume : 10 : 1
by weight : 10 : 1,3
- Consistency : Thixotropic paste
- Application temperature : +5°C to +40°C
- Open time at 23°C (73°F) / 50% r.h. (CQP 526-2) : 3 min. approx.
- Shore-A-hardness (CQP 023-1 / ISO 868) : 90 approx.
- Shore-D-hardness (CQP 023-1 / ISO 868) : 50 approx.
- Tensile stress at 23°C (73°F) / 50% r.h. (CQP 036-1 / ISO 37) : 10 MPa approx.
- Elongation at break at 23°C (73°F) / 50% r.h. (CQP 036-1 / ISO 37) : 200% approx.
- Glass transition temperature (CQP 509-1 / ISO 6721-2) : +60°C approx.
- Service temperature : -40°C to +80°C
|
Connexion
