General Features :
- Technology : Epoxy
- Colour : Dark red
STYCAST 3050 Catalyst 9 is designed for potting and encapsulation applications with very small physical spacing between parts.
The filler system is non-abrasive and readily machinable.
This is a consideration when using a dispensing equipment or where subsequent machining of the cured part is required.
Features with Catalyst 9 :
- Hardness : 88 Shore D
- Temperature : -40 °C / +130 °C
- Mix ratio by weight ( Resin / Catalyst ) : 100 / 7,5
- Mix ratio by volume ( Resin / Catalyst ) : 100 / 12
- Thermal conductivity : 0,40 W/m.K
- Compressive strength : 144 N/mm²
- Tensile strength : 54 N/mm²
STYCAST 3050 Catalyst 11 is designed for potting and encapsulation applications with very small physical spacing between parts.
The filler system is non-abrasive and readily machinable.
This is a consideration when using a dispensing equipment or where subsequent machining of the cured part is required.
Features with Catalyst 11 :
- Hardness : 88 Shore D
- Temperature : -55 °C / +155 °C
- Mix ratio by weight ( Resin / Catalyst ) : 100 / 9
- Mix ratio by volume ( Resin / Catalyst ) : 100 / 13
- Thermal conductivity : 0,40 W/m.K
- Compressive strength : 83 N/mm²
- Tensile strength : 38 N/mm²
Connexion
