TEROSON EP 1401 - CARTRIDGE 175 ML
Teroson EP 1401 is a solvent free, slightly expanding, two component adhesive, based on flexibilised and toughened Epoxy Resins.
Characteristics
- Cures at room temperature by reaction of component A and B
- By heating up both components the chemical reaction will accelerate
- Dependent on the geometry and amount of material, the degree of foam can vary
- Contains hollow microspheres, by which stiffness, strength and fatigue limit is increased
Application
- Used as reinforcement e.g. for cavities, metal sheets and structural parts
Technical characteristics
Part A
- Base : Epoxy Resin
- Colour : dark grey
- Odour : characteristic
- Density : approx. 0,8 g/cm³
Part B
- Base : Amine
- Colour : white / light grey
- Odour : of amines
- Density : approx. 0,6 g/cm³
- Mixing ratio A:B by volume : 2:1
Mixture (Part A + B)"
- Colour : gris
- Odour : pas d'odeur après polymérisation
- Potlife acc. to Bohlin (oscillating)
at 20°C : 90 min
at 30°C : 60 min
- Density (cured) : approx. 0,7 g/cm³
- Water absorbtion
24 h at 98% HR and 40°C : < 0,5% weigth gain
- Compressive strength : 15 to 20 MPa
- E-Modulus : 700 MPa
- Poisson ratio : 0,22 to 0,26
- Volume change
(depending on the curing conditions/ volume / geometry) : 0 to 30 %
- In service temperature : -40°C to +90°C
|
Connexion
