TEROSON EP 5010 TR - CARTRIDGE 175 ML
Teroson EP 5010 TR is a solvent free, two component, high strength levelling compound based on Epoxy Resins with low density.
Characteristics
- By heating up both components the chemical reaction will accelerate
- Specially developed for body rework and for rebuilding of car body metal surfaces to substitute traditional tin soldering
- The product has no shrinkage and is excellent for grinding
- Free of isocyanate, silicones and lead
- Shows no sagging and has very good modeling properties
Application
The material is used as a plumb free tin-solder replacement to fill and smooth damages.
Teroson EP 5010 TR works on steel and also on aluminium.
Technical characteristics
Part A
- Base : epoxy resin
- Colour : dark grey
- Odour : characteristic
- Density : approx. 0.8 g/cm²
Part B
- Base : amine
- Colour : white/light grey
- Odour : of amines
- Density : approx. 0.6 g/cm²
- Mixing ratio A:B by volume : 2:1
Mixture (Part A+B)
- Colour : grey
- Odour : no smell after curing
- Potlife acc. to Bohlin (oscillating)
at 20 °C 90 min(s)
at 30 °C 60 min(s)
- Density (cured) : approx. 0.7 g/cm³
- Water absorbtion
24hrs at 98% rh and 40°C: < 0.5% weight gain
- In service temperature : -40°C to +90°C
|
Connexion
