TEROSON EP 5065 IN 198 ML CARTRIDGE

It has high initial strength both at high and low temperatures (-40°C - 80°C).

Curing can be obtained with both low and high temperature.

The cured adhesive film is hard, but not brittle.

- Colour : Black

- Odour : Almost without odour

- Pot life : approx 60 min

TEROSON EP 5065 is mainly used in car repair for structural bonding of metals when requirements in terms of crash behaviors are high (e.g., car body steel with or without e-coat, galvanized steel and aluminum).

Coated surfaces are protected against corrosion.

Curing can take place at low temperatures or be accelerated using an IR radiator.

The assembly bonded shall be designed so that the bonded surface or seams are only subjected to tensile or shear forces, but not to peel forces.

It is recommended that bonding should be done with single overlaps.

Uncured adhesive can be spot-welded.