TEROSON MS 9120 SF WHITE - CARTRIDGE 310 ML
Teroson MS 9120 SF is a 1-component sealant based on Flextec Polymer, that crosslinks (cures) to an elastic material by absorbing moisture from the air.
Characteristics
- The skin formation and curing times are dependent on humidity and temperature
- By increasing the temperature and moisture these times can be reduced
- Free of solvents, isocyanates, silicones and PVC, and has a neutral odour
- Good adhesion to many substrates
- Compatible with suitable paint systems
- Good UV resistance and can therefore be used for interior and exterior applications
Application
- Seam and joint sealing in the following areas: vehicle repair, vehicle body and vehicle manufacture, railway waggon, container manufacture as well as for vehicle superstructure.
Technical characteristics
- Colour : white
- Odour : almost not perceptible when completely cured
- Consistancy : paste
- Density : approx. 1,6 g/cm³
- Skin formation time : approx. 8 min*
- Curing mechanism : humidity curing
- Cure rate : approx. 5 mm/24 h*
- Shore-A-hardness (DIN 53505): approx. 50
- Tensile strength (acc. to DIN 53504) : approx. 3 MPa
- Elongation at break (acc. to DIN 53504) : approx. 250%
- Volume change (acc. to DIN 52451) : < 7%
- Application temperature : +10°C to +40°C
- Paint compatibility : can be painted
- In service temperature range : -30°C to 90°C
- Short exposure (up to 3 h) : +120°C
* DIN 50014 standard climate : 23°C, 50% relative air humidity
|
Connexion
