Teroson MS 930 is a gun-grade, one-component sealant based on silane modified polymers, which cures by reaction with moisture to an elastic product.
Characteristics
- The skin formation and curing times are dependent on humidity and temperature
- By increasing the temperature and moisture these times can be reduced
- High position tack after matching of the parts to be bonded
- Free of solvents, isocyanates, silicones and PVC
- Demonstrates the strength necessary for elastic bonding
- Good adhesion to many substrates
- Compatible with suitable paint systems
- Good UV resistance
Teroson MS 930 allows accelerated curing as two-component material.
Application
Teroson MS 930 is used for the following applications :
- seam and joint sealing in vehicle body, railway carriage and container manufacture
- ship and boat building
- metal construction
- electrical, plastics, air conditioning and ventilation industries
- for conventional vehicle window glazing between rubber profile and glass (good adhesion to most rubber qualities, even on EPDM-basis), for bonding of floor coverings in bus manufacturing
Technical characteristics
- Colour : white
- Odour : characteristic
- Consistancy : pasty, thixotropic
- Density : approx. 1,5 g/cm³
- Sag resistance : no sagging (DIN profile 15 mm)
- Skin formation time : approx. 10 to 40 min*
- Cure rate : approx. 4 mm/24 h*
- Shore-A-hardness (ISO 868, Durometer A): approx. 30
- Tensile strength (ISO 37) : approx. 0,9 MPa
- Elongation at break (ISO 37, speed 200 mm/min) : approx. 250%
- Stress at 100 % elongation (ISO 37) : approx. 0,6 MPa
- Volume change ( DIN 52451) : < 2%
- UV resistance : no signif. changes
- UV source : Osram Vitalux 300W
- Distance to the specimen : 25 cm
- Test period : 6 weeks
- QUV resistance : no signif. changes
- QUV source : QUV weatherometer acc. to DIN 53384-A
- Test period : 6 weeks
- Damp heat test durability Reference IEC 61215/61646 clause 10.13 : given**
- Test period : 1 000 hours
- Application temperature : +5°C to +40°C
- In service temperature range : -50°C to +80°C
- Short exposure (up to 1 h) : +120°C
* ISO 291 standard climate : 23°C, 50% relative air humidity
** Damp heat conditions : 85°C, 85% relative air humidity
|
Connexion
