TEROSON MS 931 GREY - CARTRIDGE 290 ML
Teroson MS 931 is a one-component sealant based on silane-modified polymer, which can be applied by pouring and extruding.
Characteristics
- The skin formation and curing times are dependent on humidity and temperature
- By increasing the temperature and moisture these times can be reduced
- Free of solvents, isocyanates, silicones and PVC
- Demonstrates the strength necessary for elastic bonding
- High viscous and sag resistant
- Compatible with suitable paint systems
- Good UV resistance
Teroson MS 931 allows accelerated curing as two-component material.
Application
Teroson MS 931 is used for the following applications :
- as a fluid sealing in frame profiles of louvered ceilings in clean rooms
- as sealing compound for electronic parts and in filter manufactures
- for bonding mineral fiber mats in the manufacture of facade elements
- for spraying as an elastic coating
Technical characteristics
- Colour : Grey
- Odour : odourless
- Consistancy : liquid, self levelling
- Density : approx. 1,6 g/cm³
- Skin formation time : approx. 15 to 30 min*
- Cure rate : approx. 3 to 4 mm/24 h*
- Shore-A-hardness (ISO 868, Durometer A): approx. 35
- Tensile strength (ISO 37) : approx. 0,8 MPa
- Elongation at break (ISO 37, speed 200 mm/min) : approx. 100%
- Volume change ( DIN 52451) : < 2%
- Application temperature : +5°C to +40°C
- In service temperature range : -40°C to +100°C
- Short exposure (up to 1 h) : +120°C
- Viscosity* : 15 Pa.s
- Equipment : Physica
- Measuring System : plate/plate
* ISO 291 standard climate : 23°C, 50% relative air humidity
|
Connexion
