TEROSON MS 9320 SF GREY - CARTRIDGE 300 ML
TEROSON MS 9320 SF is a sprayable sealant based on SMP-Polymer, that crosslinks to a rubber-elastic material with good abrasion resistance by absorbing humidity from the air.
Characteristics
- The skin formation and curing times are dependent on humidity and temperature
- By increasing the temperature and moisture these times can be reduced
- Sag resistant
- Sprayable and brushable
- Repaired seams have the same appearance as the original
- Good paint compability, also to alcohol containing paints
- Good adhesion to metals, primers and top coats
- Free of solvents, isocyanates, silicones and PVC
- UV resistant
- High ageing resistance
- Spotweldable if not cured
- Fast through curing
Application
Teroson MS 9320 SF is used with automobiles, particularly for the repair sealing of seams originally applied, in thefollowing areas :
- engine compartmen
- luggage boot
- passenger cabin
- wheel housing/underbody
Technical characteristics
- Colour : grey
- Odour : characteristic
- Consistancy : paste
- Density : approx. 1,5 g/cm³
- Skin formation time : approx. 8 to 20 min*
- Curing mechanism : humidity curing
- Cure rate : approx. 4,5 mm/24 h*
- Shore-A-hardness (DIN 53505): approx. 30
- Sag resistance : very good
- Application temperature : +15°C to +35°C
For flat stream applications also up to 60°C short exposure (Teroson cartridge oven)
- Paint compatibility : oui
- Chemical resistance : resistant to UV-ageing and weathering
- Adhesion : raw metal sheet, EC paint, top-coat paint, metallic paint
- In service temperature range : -30°C to 90°C
- Short exposure (up to 3 h) : +120°C
* DIN 50014 standard climate : 23°C, 50% relative air humidity
|
Connexion
