Teroson UP 4310 A is a high quality, solvent free, two component adhesive, based on polyurethane.
Characteristics
- Pourable
- Reaches high strength
- Excellent product in indoor use, e.g. sandwich systems for facade elements
- The fully cured adhesive film is hard
Application
Used to bond PVC rigid foam, polyurethane rigid foam, phenolic foam, mineral fibres and other insulation materials to painted and primed metals, wood and wooden materials and plasterboards.
Mainly used in the manufacture of sandwich systems (facade elements, partitioning walls) and as a potting material with adhesive properties in the electronics industry.
In addition, the adhesive is used for bonding of acrylic glass to one another and to light alloys (bubble levels made of acrylic glass).
Technical characteristics
Component A
- Colour : light beige
- Density : approx. 1.4 g/cm³
- Solids : > 99%
- Consistency : thick liquid
- Viscosity : approx. 12.000 mPa.s
Equipment : Brookfield RVT
Spindle : 7
Speed : 20 rpm
Temperature : +20°C
Partie B
- Colour : brown
- Density : approx. 1.2 g/cm³
- Solids : > 99%
- Consistency : thin liquid
- Viscosity : approx. 200 mPa.s
Equipment : Brookfield RVT
Spindle : 7
Speed : 20 rpm
Temperature : +20°C
- Mixing ratio :
by weight : 3.5:1
by volume : 3:1
Mixture (Component A + B)
- Colour : beige-brown
- Odour : practically odourless
- Density : approx. 1.35 g/cm³
- Consistency : liquid
- Viscosity : approx. 3.700 mPa.s
Equipment : Brookfield RVT
Spindle : 7
Speed : 20 rpm
Temperature : +20°C
- Potlife : approx. 45 mins
Mixture : 100 g
Temperature : +23°C
- Application temperature : +5°C to +30°C
- Consumption : 150 - 300 g/cm² in the case of application to both bonding surfaces, depending on the substrates concerned and method of application
- In service temperature range : -30°C to 100°C
short exposure (up to 1 h) : +150°C
|
Connexion
