TEROSON PU 92 GREY - CARTRIDGE 310 ML
Teroson PU 92 is a gun-grade, one-component polyurethane sealant/adhesive which cures by reaction with moisture to an elastic product.
Characteristics
- The skin formation and curing times are dependent on humidity and temperature
- By increasing the temperature and moisture these times can be reduced
- Good adherence on metal and plastics even without primer
- Can be painted wet-onwet system
- Sag resistant
- High curing rate
- Good aging resistance
- Can be sanded
Application
Teroson PU 92 is used for elastic sealing and bonding, in particular for the filling of sealing cracks and the realization of thin layer seams in the following areas :
- vehicle and vehicle body manufacture
- railway carriage and container manufacture
- ship and boat building
- air conditioning and ventilation industries
Technical characteristics
- Colour : grey
- Odour : aromatics (odourless after curing)
- Consistancy : pasty
- Density : approx. 1,15 g/cm3
- Sag resistance : very good
- Curing mechanism : humidity
- Skin formation time (DIN 50014, 23°C,50% h.r.) : approx. 30 – 60 mins
- Cure rate (DIN 50014 : 23° C, 50% h.r.) : approx. 4mm / 24h
- Shore-A-hardness : env. 35
- Tensile shear strength (DIN 53504) : approx. 1,6 MPa
- Elongation at break (DIN 53504) : 620 – 650%
- Shear strength (DIN EN 1465) : approx. 1 MPa
- Tensile strength (DIN 53515) : approx. 11 N/mm
- Application temperature : +5°C to +35°C
- In service temperature range : -40°C to +70°C
Limited (24h) : +180°C
Short exposure (up to 1 h) : +120°C
|
Connexion
