TEROSON PU 9225 SF ME - CARTRIDGE 250 ML
Teroson PU 9225 SF ME is a polyurethane based two-component adhesive which cures at room temperature.
Characteristics
For accelerated curing it is recommended to increase the temperature up to 60 to 70 °C.
The product is supplied in a convenient twin cartridge and is rapid-curing.
Teroson PU 9225 SF ME can be painted with normal commercial car repair refinishing paints.
When applying Teroson PU 9225 SF ME to plastics the use of an approved Henkel primer is absolutely necessary.
Application
Teroson PU 9225 SF ME is used for repair of bumpers, trim and body parts made of plastic e.g. PP / EPDM, SMC, PC, PA, ABS, and PUR.
Technical characteristics
Partie A
- Colour : grey
- Density : approx. 1,6 g/cm³
Partie B
- Colour : grey
- Density : approx. 1,3 g/cm³
- Mixing ratio A:B by volume : 1:1
Mélange (Parties A+B)
- Colour : grey
- Potlife (25g, 23°C) : approx. 2 min
- Tack-free time (23°C, 50% HR) : approx. 20 min
- Curing time at 23°C : approx. 1,5 h
Layer thickness : 3 mm
- Shore A hardness : approx. 95
- Grindability : good
- Shear strength
After 2 days (23°C, 50% HR) : approx. 8 MPa
Layer thickness : 0,3 mm
Cross head speed : 10 mm/min.
- Paintability : good
|
Connexion
