Teroson RB 1210 is a self-adhering plastic sealer strip based on synthetic rubber.
Characteristics
- High oil absorbtion
- Excellent adhesion on many substrate
- Good corrosion protection
- High viscosity
- Excellent sag resistance
- Wash-off resistant
- Compatible with surface treatment and E-coat paint used in automotive industry
Application
- Specially designed for application on oily sheet metal, to bridge larger tolerances, e.g. as antiflutter for struts in the body shop of the automotive industry
Technical characteristics
Uncured
- Colour : white
- Density : approx. 1,6 g/cm³
- Solids : approx. 85%
- Penetration : approx. 80 1/10 mm
Needle : ASTM D5, 5s, 100 g
Temperature : 20°C
- Application temperature : room temperature
Cured (25 min, at 175°C)
- Expansion rate : approx. 55%
- Shear strength (DIN EN 1465) : approx. 0.3 MPa
Layer thickness : 3 mm
- Temperature resistance : good
- In service temperature range : -40°C to +100°C
- Short exposure (up to 1 h) : +200°C
- Water absorption : 2%
- Flowing characteristics : no flow
- Bending test in the cold : no flaking off
*= 23°C, 50% rh
|
Connexion
