TEROSON RB 4006 - CARTRIDGE 310 ML
Teroson RB 4006 is a high quality, gun-grade, one component sealant based on butyl rubber with a low solvent content.
Characteristics
- After evaporation of the solvents, Teroson RB 4006 represents a tough plastic, extrudable, deformable sealing mass.
- The complete drying depends on the ambient temperature and on the applied layer thickness.
- Due to its deformability Teroson RB 4006 should only be used for sealing of gaps with little or no movement.
- Suitable for the sealing of inner and outer joints
- Can be applied on horizontal as well as on vertical areas wihtout draining off.
Application
- sealing of sheet metal and plastic overlaps
- caravan, motor home industry
- Air controlling / ventilation technology
Technical characteristics
- Colour : Grey
- Density : approx. 1,4 g/cm³
- Constitency : Pasty
- Solids : approx. 85%
- Skin formation time* : approx. 20 to 30 min after application
- Setting time : 1 to 2 weeks
- Sag resistance : Very good
- Acceptable deformation : < 5%
- Working temperature : -20°C to +80°C
Short exposure (up to 1h) : +100°C
*DIN 50014 standard climate : 23°C, relative air humidity 50%.
|
Connexion
