TEROSON RB II - 20 MM x 40 M
Teroson RB II is a solvent free, permanently plastic, multipurpose sealant based on synthetic rubber.
Characteristics
- Serves as a good corrosion protection
- Can be painted with conventional paints based on oil and synthetic resins
- Exhibits very good water and aging resistance
- Due to its tackiness the sealant adheres to most surfaces while they are clean and dry
- Shows excellent compatibility with a variety of substrates
- Because of its characteristics Teroson RB II is used as an inner sealant when sealing overlapping substrates
- The sealed parts need to be fixed mechanically, e.g. by clamps, screws, rivets or similar
Application
- Used for sealing of sheet metal, wood and plastic overlaps i.e. in the field of sheet fabricating industry, plant manufacture, household appliance industry or air conditioning / ventilation technology
- The material has also been proven in the automotive and vehicle industry (wing, floor area, trunk, cable leadtrough)
Technical characteristics
- Density : approx. 1.58 g/cm³
- Consistency : plastic
- Solids : 100 %
- Penetration (cone 150 g, 6 s, 23°C) : approx. 40 1/10 mm
- Tack : low
- Paint compatibility : can be painted
- In service temperature range : -25°C to +80°C
- Short exposure (up to 1 h) : +150°C
|
Connexion
