TEROSON WX 400 - DRUM 60 L
Teroson WX 400 is a solvent containing anticorrosive agent for cavity conservation with high solids, based on waxes, polymers and anticorrosive additives.
Characteristics
- Thixotropic solution which can be well atomized
- Optimum protection even of those areas which are difficult to reach and also between narrow sheet metal tolerances
- Infiltrates and displaces humidity
- High content of corrosion inhibitors
- Excellent penetration characteristics
- Forms a plastic, water-repellent film with a beige transparent colour
Application
- Used in garages for spraying cavities in motor vehicle bodies in addition to the existing cavity conservation applied to new cars
- For follow-up treatment after 2 - 3 years and after an accident damage repair
Technical characteristics
- Colour : beige transparent
- Odour : characteristic
- Consistency : thixotropic
- Density : approx. 0,96 g/cm³
- Solids : approx. 60 %
- Dripping Temperature of the solids (DIN 51801) : approx. 150°C
- Sag resistance : min. 100 μm
- Penetration : > 55 mm; gap 0,1 mm
- Paint compatibility : no permanent changes of the top-coat
- Removability after 24 hrs : dried material can easily be removed
- Behaviour in the repair paint oven (1.5 hrs at 90°C) : no running off
- Behaviour in the cold : no cracks
Layer thickness 40 μm
Storage 2 d -40 °C
Mandrel 70 mm Ø
- Corrosion resistance salt spray test to DIN 50021 (35°C, salt solution 5%, 240 hrs) : no corrosion
- Application temperature : +15°C to +25°C
- In service temperature -40°C to +90°C
Short exposure (up to 1 h) : +120°C
|
Connexion
